Ballistic Fabrication : Forged Ballistic Rod End [RE-981-1]

Rod Ends, Joints & Bushing, and Accessories

製品：Ballistic Fabrication : Forged Ballistic Rod End [RE-981-1]

ブランド, 品番：RE-981-1

適合： Jeep, Custom Buggy, Universal, and Other, Custom fit.

販売価格：Open（税込）


	Forged Ballistic Rod End The Ultimate Rod End Formerly known as the BILLET Ballistic Rod end, we have released the new and improved FORGED Ballistic Rod end. Why should you care? How about 25% strength increase and nearly a 40% price decrease! Compare that to the competitions billet rod ends.

Choose Options and Quantity

Thread Direction

Right Hand

Left Hand

Bolt Hole Size (Bore)

9/16 inch

5/8 inch

3/4 inch

The Ultimate Rod End

Formerly known as the BILLET Ballistic Rod end, we have released the new and improved FORGED Ballistic Rod end. Why should you care? How about 25% strength increase and nearly a 40% price decrease! Compare that to the competitions billet rod ends.

Benefits of our Forged Rod End vs. our Competitors Billet Rod End:

Production cost - When we start with a billet chunk of 3" 4340, we put close to 1 hr of machine time into it with 6 machine operations. Conversely, we will have approximately 6 minutes of machine time into the pre-shaped, pre-hardened forging.

No long trips to the heat treat plant. We're not taking off a ton of material so we can afford to machine them in the hardened state and send them directly off to be plated.

We're buying 3.14lbs of 4340 instead of 15.1lbs. As previously mentioned, we won't be spending our time whittling the blank down 500% in size, nor paying for that extra material like our competition.

Increased Strength - When machining a billet piece of steel in the shape of a rod end we are cutting across the grain of the material. When a forging is made to near net shape, the grain structure is not effected and additional stress risers are avoided.

Material has been added where it's most important. We've added a large boss around the grease zerk and set screw area to help counteract the stress riser created by drilling and tapping in this area.

Features

100% rebuildable using solid BRONZE races for longer life and higher strength
1.25" 12 tpi shank standard
4140n Chromoly spanner nut
Bearing is machined from 17-4 PH Stainless Steel, polished to mirror finish then treated to H900 44Rc, then gas nitrided to 68rc surface hardness .005" deep
9/16", 5/8", and 3/4" bores available, all with 2.625" mounting width
70 degrees of total movement with a 9/16" ball.
Socket and Wrench style assembly tools available (sold separately)
100% made in the USA!
LIFETIME WARRANTY

What's Included